{"id":1003,"date":"2023-02-23T07:29:15","date_gmt":"2023-02-23T07:29:15","guid":{"rendered":"https:\/\/cleverfixes.com\/?p=1003"},"modified":"2023-10-05T02:14:02","modified_gmt":"2023-10-05T02:14:02","slug":"tcl-tv-light-blinking","status":"publish","type":"post","link":"https:\/\/cleverfixes.com\/tcl-tv-light-blinking\/","title":{"rendered":"TCL TV Light Blinking (7 Fixes You Can Try now)"},"content":{"rendered":"\n

TCL TVs are a fantastic bang-for-your-buck option in today’s market. Most of them come with Roku as their smart platform, a powerful system that can go toe-to-toe with those found in higher-end TV brands.<\/p>\n\n\n\n

Like any tech, though, TCL TVs can sometimes experience issues. And a common problem is a TCL TV light blinking.<\/strong><\/p>\n\n\n\n

The good news is, there are some easy, do-it-yourself ways to address the problem.<\/p>\n\n\n\n

Let me walk you through why you might find your TCL TV light blinking and the steps you can take to get it back to normal.<\/strong><\/p>\n\n\n\n

\n

The Clever Fix<\/strong>

Search for a small button labeled “Reset” located at the back of your TV. Using a pen or a straightened out paperclip, press down and hold this button for about 10 seconds.<\/p>\n<\/div><\/div>\n\n\n\n

Why is my TCL TV light blinking?<\/h2>\n\n\n\n

Often, a blinking light on a TCL TV is a sign that your TV is stuck in standby mode.<\/strong><\/p>\n\n\n\n

But there could be other causes too. The blinking light might indicate that your TV isn’t connected to the internet, the remote has been disconnected, or there’s an issue with your TV’s backlight.<\/p>\n\n\n\n

How to fix a TCL TV light blinking<\/h2>\n\n\n\n

If your TCL TV doesn’t turn on or the screen is black<\/h3>\n\n\n\n

1. Reset your TV<\/h4>\n\n\n\n
\"Photo<\/figure>\n\n\n\n

If your TCL TV light is blinking and the TV won’t switch on, a quick reset might be just what it needs. You’ll usually find a tiny reset button at the back of your TV. Grab a pen or a straightened paperclip, press and hold the button for around 10 seconds.<\/strong><\/p>\n\n\n\n

Don’t worry if it doesn’t work the first time – you may need to give it a few tries.<\/p>\n\n\n\n

A typical TCL TV’s status light will blink briefly when the TV is switched on from being off. After a few seconds, the TV should come to life, the blinking light will stop, and the image will pop up.<\/p>\n\n\n\n

However, there are cases where a TCL TV seems to get stuck in standby mode. When this happens, the LED light keeps blinking, leaving the screen in darkness.<\/p>\n\n\n\n

The quickest way to fix this is by hitting the TV\u2019s reset button.<\/strong><\/p>\n\n\n\n

Finding the reset button can be a bit of a challenge, given that it’s small and not always clearly labeled.<\/p>\n\n\n\n

Look for it at the back of the TCL TV, often at one side, above or below the HDMI and USB ports. Occasionally (though it’s rare), you might find it underneath the bottom bezel of the TV.<\/p>\n\n\n\n

This tiny button is a factory reset button, restoring your TV to its brand-new, straight-out-of-the-box condition. Once you’ve pressed the button successfully, your TV will reboot and you’ll need to go through the setup process again.<\/p>\n\n\n\n

2. Power cycle your TV<\/h4>\n\n\n\n

If your TCL TV is trapped in standby mode, with a blinking status light, power cycling your TV can help.<\/p>\n\n\n\n

Power cycling, also known as a soft reset, drains any remaining power from your TV and resets its main board. It’s a robust reboot that can clear out any glitches or software bugs.<\/p>\n\n\n\n

To perform a power cycle, unplug your TCL TV from the power outlet for about a minute. While it’s unplugged, press and hold your TV\u2019s power button for about 15 seconds. After the minute is up, plug it back in.<\/p>\n\n\n\n

Once everything is plugged back in, check to see if the light has stopped blinking and if you can turn your TCL TV on.<\/p>\n\n\n\n

3. Have your backlight tested and repaired<\/h4>\n\n\n\n

If your TCL TV status light continues to blink and the screen remains dark, it might mean that your backlight or its driver is damaged.<\/p>\n\n\n\n

The backlight is a key component that produces the light needed for an image to show up on your screen. It’s made up of LED strips. If these strips are not working as they should, your TV screen will stay dark.<\/p>\n\n\n\n

\n